SMARTGEN HAT310 120VAC ATS Controller 120/240VAC 50-60Hz 1-3 Phase Version SmartGen

SMARTGEN HAT310 120VAC ATS Controller

HAT310-120V ATS Controller is suitable for 2-stage of PC, and ATS of CC class (close signal is constant output). It can accurately detect 3-phase 4-wire mains voltage and generator single-phase voltage. When the mains under-voltage and loss of phase occurred, HAT310-120V will control ATS transfer after a delay. If the mains are unavailable, the controller has the function to initiate signals to start the gen-set.

PERFORMANCE AND CHARACTERISTICS

HAT310-120V controller can detect 3-phase 4-wire mains voltage/generator single phase voltage and control ATS.
Main characteristics are as follows,

• 1) With automatic charge and automatic recovery function.
• 2) With under-voltage and loss of phase-detection function.
• 3) LED indicators on the panel can show working status of controller clearly.
• 4) Applicable for 2 isolated neutral line.
• 5) Mains normal delay configured via potentiometer (range: 1~60s), and generator normal delay via potentiometer (range: 1~60s)
• 6) Mians is unavailable, if any phase voltage belows minimum working voltage or phase loss occurred gen-set will be started.
• 7) Output contact capacity of mains and generator transfer relay is 16A AC120V, which can directly used to drive switch conversion.
• 8) Output contact capacity of GENS START relay is 16A AC120V, it is volt free normally-open/normally-closed contact.
• 9) Strong anti-electromagnetic interference performance enable controller to use in the environment with strong electromagnetic interference.
• 10) Modular design, self extinguishing ABS plastic shell, pluggable terminal, compact structure;
• 11) Two installation ways: internal 35mm slide-way and internal screw mounting.

SPECIFICATION：

• Operating Voltage – AC power A1N1/A2N2 supply. Rated AC120V (range: AC90~150V)
• Power Consumption Under rated voltage, power consumption of voltage circuit is not more than 2W
• AC Voltage Input: – 3-phase 4-wire (120/208 VAC),
• 2 phase 3-wire (120/240VAC),
• single-phase 2-wire (120VAC):
• AC70V ¨C AC150V (ph-N)
• AC Frequency – 50/60Hz
• Gens-set Starter Relay – 16A 120V AC Volts free output (Normally close)
• Mains Close Relay – 16A 120V AC AC Supply output (Normally open)
• Gen Close Relay – 16A 120V AC AC Supply output (Normally open)
• Case Dimensions – 110mmx77.5mmx55mm
• Screw Mounting Dimensions – 65mmx65.1mm
• Working Conditions – Temperature: (-25~+70)¡ãC;
• – Humidity: (20~93)%RH
• Storage Condition – Temperature: (-25~+70)¡ãC
• Insulation Strength – Apply AC1.5kV voltage between high voltage terminal and low voltage terminal; The leakage current is not more than 3mA within 1min.
• Weight – 0.2kg