Engine Controller Module HAT600NB for SmartGen ATS Module SmartGen

Engine Generator Controller Module HAT600NB Generator Control ATS Module

HAT600N series ATS controller is an intelligent dual-supply module with programmable function, automatic measurement, LCD display, and digital communication. It combines digital intelligence and networking. Automatic measurement and control can reduce incorrect operation. It is an ideal option for ATS.

• Product Code：6020028
• Power Supply：DC(8～35)V/AC 220V
• Case Dimensions：209*153*55(mm)
• Panel Cutout：186*141(mm)
• Operating Temp. ：(-25~+70)℃
• Weight：1.0kg

CHARACTERISTICS：

1. System type can set for: Mains (1#) & Mains (2#), Mains (1#) & Generator (2#), Generator (1#) & Mains (2#), Generator (1#) & Generator (2#).

2. Backlit 128×64 LCD, optional Chinese and English display, push-button operation.

3. Measure and display 2-way 3 phase Voltage and Frequency:

   1#                                                       2#

   Line-Line voltage (Uab, Ubc, Uca)     Line-Line voltage (Uab, Ubc, Uca)

   Line-Nature voltage (Ua, Ub, Uc)       Line-Nature voltage (Ua, Ub, Uc)

   Frequency (F1)                                   Frequency (F2)

4. Measure and display active power, apparent power, power factor, and 3 phase current;

5. Overcurrent alarm;

6. Over/under voltage, loss of phase, reverse phase sequence, over/under frequency protection.

7. Automatic/Manual mode. In manual mode, can force a switch to close or open;

8. All parameters can be set on site. Two different passwords which ensure authorized staff operation only.

9. During genset testing, the ATS controller can be set either on On-load or Off-load mode.

10. ATS Controller has the function of automatic Re-closing.

11. The closing output signal can be set as on intervals or as continuous output.

12. Applicable for ATS of one neutral position, two neutral positions and change over.

13. Applicable for 2 isolated neutral lines for Generator and Mains.

14. Real-time clock (RTC).

15. The event log can record 99 items circularly.

16. The timely schedule can be set on a monthly or weekly basis and trial can be set as with on- load or offload.

17. Can control two generators to work in a cycle, even the Genset running time and crank rest time can be set.

18. Widely range of DC power supply (8V to 35V). Max.80V DC input can be endured in an instant, or be supplied via HWS560 module (input AC 85V~560V, output DC 12V).

19. Wide space between connecting terminals of AC input. Max.625V input voltage.

20. With standard isolated RS485 communication interface. With “remote controlling, remote measuring, remote communication” function by the Modbus communication protocol.

21. Can check the current status of the controller (including switch digital input, over Voltage, and under Voltage, etc.).

22. Suitable for various AC systems (3 phase 4-wires, 3-phase 3-wires, single-phase 2-wire, and 2-phase 3-wire).

23. Modular design, flame-resisting ABS plastic shell, plug-in terminals, and embedded installation. Compact structure with easy installation.