✽Actuator ADC225-12V/24V Details:
- Working Pressure:12VDC/24VDC
- Working Angle:28 degree.
- Working Current: Less than 4A
- DC resistance:4.5OM
- the maximum torque:4Nm
- Hit:20G
- Vibration: Less than 500Hz
✽Controller ESD5500E Details:
Specification:
- Model: ESD5500E
- Speed range: 1KHz ~ 7.5KHz
- Thermostability: Max.+1%
- IDLE adjustment: 160±20Hz ~ 95% of rated speed
- DROOP adjustment: The minimum position is 15Hz +6Hz/ load current change per ampere
- The maximum position is 400Hz +75Hz/ load current change per ampere
- External speed adjustment:±200Hz (external 1KQ)
- Weight: Approx.600g/ 21.2oz
Input power:
- Supply 12 or 24V DC Battery Systems(Transient and Reverse Voltage Protected)
- Polarity Negative Ground(Case Isolated)
- Power Consumption 50mA continuous plus actuator current
- Actuator Current Range @ 25℃-(Inductive Load) Min. 2.5 Amps, Max. 10 Amps continuous
- Speed Sensor Signal 0.5-120 V RMS
- Speed Switch Relay Contacts(N.O.and N.C.) 10Amp
✽Magnetic Pickup (MPU) 3034572 Speed Sensor Details:
- Measure range: 50-5000Hz
- Inductance: 142MH+25%Thread Size: 5/8-18 UNF-2A
- Tap Drill Size: 37/64 inch
- Proximity to Gear Teeth: .028 in min. – .042 in max.(Approximately 1/2 to 3/4 turn)
- Temperature Range: -55 deg C to 105 deg C
- Output at Cranking Speed: 1.5 volts AC minimum
- Maximum Output: 30 volts AC
- Coil Resistance: 300 ohms maximum
✽MSP675 Magnetic Pickup MPU Generator Speed Sensor Details:
- Range:50-5000Hz
- Inductance value:142MH+25%
- Resistance value:300Ω MAX
- Thread:5/8-18UNF-2A
- Off-tooth distance:0.64-0.89mm
- Temperature range:-55℃ celsius to 105℃
- Idle output:1.5 volts AC Min
- MAX output:30 volts AC
Package:1*Actuator+1*Speed Controller+1*3034572 Speed Sensor +1*MSP675 Speed Sensor